As such it is important to make sure that lighting control panel basics they are continuing to measure correctly. If an instrument is not periodically checked and calibrated, then the accuracy of tests performed since it was last checked are drawn into question, which could create a problem in the event of a claim. These are the simple-to-use, comparatively much cheaper, and often used by businesses who test in-house.

Here, the potential risks to employee welfare, legal fees, and brand credibility are obvious. Therefore, the vast majority of businesses embrace this form of due diligence. Sometimes, injuries do occur, even when a routine of regular and compliant PAT electrician course birmingham testing assessments are in place. However, in this instance, companies can argue appropriate control measures have been taken to reduce the likelihood of such an incident occurring. You don’t need prior experience of electricity – and you certainly don’t need to be a qualified electrician to carry out PAT Testing. All props were designed to obtain the necessary information regarding your physical ability.

However, we should expect to see the insulation resistance of an extension lead much higher than this, usually to the limit of the test instrument range, typically 19.99MΩ. Ensure the kettle operates correctly, with any power lights working and the kettle switching off when the water starts to boil. Most kettles are rated at around 1,800W – 2,200W, so you should expect the load reading to be within this range. This table is based on guidance originally published by the IET in the Code of Practice for In-Service Inspection and Testing of Electrical Equipment. It was subsequently removed from the Code of Practice with the publication of the 5th edition. We also provide a copy of the initial frequency table in our training course manual.

Portable Appliance Testing – Pat Testing

If, in the opinion of the instructor, the delegate is not able to make up the missed work, he will not be allowed to join the course, and cancellation fees will apply. It is the responsibility of the person or organisation making the booking to ensure that delegates meet any specified course pre-requisites. All certification is subject to the City & Guilds Quality assurance procedure. If you require a certificate of attendance in the interim please don’t hesitate to contact us. Delegates successfully completing the City & Guilds 2377 theoretical examination and practical assignment will be issued with a certification by City & Guilds.

Continuous Learning Support

In this course, delegates learn both the technical theory behind the PAT testing procedure and how to carry out physical tests of different kinds of equipment. Delegates will also learn how to conduct thorough visual inspections, how to spot dangers, and what is required to deem an electrical appliance as being fit and safe for use. The test covers everything from computers to kettles and is a legal requirement for businesses to carry out on a regular basis in order to comply with regulations.

Cdm Regulations Training

This manual serves not only as a guide during the course but also as a handy reference when conducting PAT testing after the training. Recognising the real-world challenges that may arise, we provide ongoing technical assistance to all our graduates. Whether you have a query, need advice, or seek clarification on any aspect of PAT testing, we are always on hand to assist and guide you. It is performed at rated voltage with values not exceeding 5mA for Class I appliances or 1mA for Class II appliances. All IT equipment should be tested, including power cords to this equipment although they are required to be tested separately from the equipment that they power, because they are held to a different standard. Each device, from insulation testers to earth continuity testers, demands a good understanding of its operation and application.

If you work with a faulty or poorly-maintained device, you risk getting an electric shock, burns, or even fires. At any time there are at least two people in the office who have an in depth knowledge of Pat testing and the test equipment. What we would advise is that if you have not carried out Pat Testing for a while and need a refresher you could use the Pat Testing Training Online Course as a refresher or attend a 1 day course. Upon successful completion of the multiple choice exam you will receive a Certificate of Competence in In Service Inspection and Testing of Electrical Equipment.